ROHM Develops New High Power Density SiC Power Modules

ROHM Semiconductor today announced the development of new 4-in-1 and 6-in-1 SiC molded
modules in the HSDIP20 package optimized for PFC and LLC converters in onboard chargers
(OBC) for xEVs (electric vehicles). The lineup includes six models rated at 750V (BSTxxx1P4K01)
and seven products rated at 1200V (BSTxxx2P4K01). All basic circuits required for power
conversion in various high-power applications are integrated into a compact module package,
reducing the design workload for manufacturers and enabling the miniaturization of power
conversion circuits in OBCs and other applications.
 
In recent years, the rapid electrification of cars is driving efforts to achieve a decarbonized society.
Electric vehicles are seeing higher battery voltages to extend the cruising range and improve
charging speed, creating a demand for higher output from OBCs and DC-DC converters. At the
same time, there is an increasing need in the market for greater miniaturization and lighter weight for
these applications, requiring technological breakthroughs to improve power density - a key factor -
while enhancing heat dissipation characteristics that could otherwise hinder progress. ROHM’s
HSDIP20 package addresses these technical challenges that were previously becoming difficult to

overcome with discrete configurations, contributing to both higher output and the downsizing of
electric powertrains.
 
The HSDIP20 features an insulating substrate with excellent heat dissipation properties that
suppresses the chip temperature rise even during high power operation. When comparing a typical
OBC PFC circuit utilizing six discrete SiC MOSFETs with top-side heat dissipation to ROHM’s 6-in-1
module under the same conditions, the HSDIP20 package was verified to be approx. 38°C cooler (at
25W operation). This high heat dissipation performance supports high currents even in a compact
package, achieving industry-leading power density more than 3 times higher than top-side cooled
discretes and over 1.4 times that of similar DIP type modules. As a result, in the PFC circuit
mentioned above, the HSDIP20 can reduce mounting area by approx. 52% compared to top-side
cooled discrete configurations, greatly contributing to the miniaturization of power conversion circuits
in applications such as OBCs.
Going forward, ROHM will continue to advance the development of SiC modules that balance
miniaturization with high efficiency while also focusing on the development of automotive SiC IPMs
that provide higher reliability in a smaller form factor.
 
Product Lineup

 
Application Examples
Power conversion circuits like PFC and LLC converters are commonly used in the primary side
circuits of industrial equipment, allowing the HSDIP20 to also contribute to the miniaturization of
applications in both the industrial and consumer electronics fields.
 Automotive systems
o Onboard chargers, electric compressors and more.
 Industrial equipment
o EV charging stations, V2X systems, AC servos, server power supplies, PV inverters,
power conditioners, etc.
 
Sales Information
Availability: OEM quantities (April 2025)
 
Supporting Information
ROHM is committed to providing application-level support, including the use of in-house motor
testing equipment. A variety of supporting materials are also offered such as simulations and thermal
designs that enable quick evaluation and adoption of HSDIP20 products. Two evaluation kits are
available as well, one for double-pulse testing and the other for 3-phase full bridge applications,
enabling evaluation under close to actual circuit conditions

For more information, please contact a sales representative or visit the contact page on ROHM’s
website.
 
EcoSiC™ Brand
EcoSiC is a brand of devices that utilize silicon carbide, which is attracting attention in the power
device field for performance that surpasses silicon. ROHM independently develops technologies
essential for the advancement of SiC, from wafer fabrication and production processes to packaging,
and quality control methods. At the same time, we have established an integrated production system
throughout the manufacturing process, solidifying our position as a leading SiC supplier.

EcoSIC™ is a trademark or registered trademark of ROHM Co., Ltd.       
______________________________
 
 ROHM Media Contact
Heike Mueller
ROHM Semiconductor
408-737-6294
hmueller@rohmsemicondcutor.com